Menü

Angebot

Generalimporteur Unternehmen

Generalny dystrybutor

Sie schreiben über uns

Zertifizierungen

IGET SECURITY M3P19 WIRELESS CO DETECTOR FOR IGET SECURITY M3

Produzent:
IGET- MOBILE / SECURITY
Kod producenta:
IGET SECURITY M3P19
Lieferbarkeit:
2
IGET SECURITY M3P19 WIRELESS CO DETECTOR FOR IGET SECURITY M3
Produktbeschreibung
iGET SECURITY M3P19 - Wireless detector of carbon monoxide (CO)
Wireless carbon monoxide detector that works independently or as accessories for alarm iGET SECURITY M3 and M4 iGET SECURITY . Meets EN50291 and CE certification.
 
Wireless carbon monoxide detector iGET SECURITY M3P19 that works independently or as accessories for alarm iGET SECURITY M3 and iGET SECURITY M4 . It is used for detecting hazardous and toxic carbon monoxide (colorless and odorless, human senses can not be received). This gas is produced by incomplete combustion of fuels such as wood, charcoal, coal, natural gas, propane, paraffin, fuel oil, butane, kerosene, gasoline etc. iGET SECURITY M3P19 a fault detection, test button, power 2x AA batteries (included) . Low power consumption.
 The main parameters:
- the detector is intended to all the rooms which require monitoring of the levels of carbon monoxide, 
- once detect CO Flashes red warning lamp and starts the siren detector 
- the detection method: a highly sensitive electrochemical sensor (min. 40 ppm) 
- comprises a test button to check correct operation, 
- detection of the error condition / disorder lights amber LED 
- indication of a low battery condition, the yellow LED 
- volume internal siren alarm 85 dB at 3 m from the detector 
- detector can also wirelessly connect with alarm iGET SECURITY M3 and iGET SECURITY M4and thus be guaranteed full protection. Alarm after receiving the alarm signal will also trigger a siren and sends an SMS about this fact 
- the detector operates at a frequency of 433.29 MHz, with this it can be used with many other brands alarms that operate on the same frequency 
- Power: 2 x 3 batteries V, type AA (included) 
- low power consumption.
 
Use of the detector. What is carbon monoxide gas, and why is it so dangerous?
Carbon monoxide, CO labeled, is very dangerous, colorless and poisonous gas. It has no odor and is toxic. In any enclosed space (home, cottage, office, apartment, etc.) Can be smaller accumulation of gas mean great danger.
Carbon monoxide is generated by incomplete combustion of fuels such as wood, charcoal, coal, natural gas, propane, paraffin, fuel oil, butane, kerosene, gasoline, and in tobacco smoke. 
Incomplete combustion can occur in all devices that burn these materials, e.g. if the device is faulty, improperly maintained, or when the flue blockage or insufficient ventilation in the room. They are such .: fireplaces, stoves, chimneys, boilers, heating, etc.
Specifications:
Broadcast frequency: 433.29 MHz 
Operating temperature: -10 ° C ~ + 45 ° C 
Operating Humidity: 30% ~ 95% (non-condensing) 
Operating Environment: IP20 (internal mode) 
dimensions of the device: 110 mm x 40 mm 
Durability detector recommended three years 
sensitivity in accordance with EN50291: 2010 
Meets / certification: EN50291: 2010, RoHS, CE 
sensitivity: 
40 ~ 75 ppm - alarm 75 minutes, 
75 ~ 200 ppm - alarm within 25 minutes, 
200 ppm and higher - the alarm within 30 to 50 seconds 
range signal to the alarm center unit: up to 100 m line of sight
 
Package contents:
- carbon monoxide detector iGET SECURITY M3P19 
- Material for mounting 
- Battery 2 x 1.5 V AA 
- handle the detector for mounting on the wall / ceiling 
- operating instructions and installation / operating instructions
 

Spezifikation herunterladen PDF
keine Produkte in dieser Kategorie vorhanden